Text Box: PLIOGRIP SOLID EPOXY RESIN PER 5200TC AND PLIOGRIP HARDENER PH 700 Hot Curing Solid Epoxy System for current and potential transformers GENERAL DESCRIPTION PLIOGRIP EPOXY RESIN PER 5200TC is an unmodified solvent free, solid epoxy resin. It has a lower viscosity at the processing temperature of 120°C and gives a longer pot-life. PLIOGRIP HARDENER PH 700, a white solid organic acid anhydride, is recommended for use PLIOGRIP PER 5200TC resin. Being very reactive, it does not require the use of an accelerator. APPLICATION: Pliogrip Epoxy Resin PER 5200TC is used for casting, bushing, potting voltage transformers, voltage current transformers (CTs & PTs), metal joints in electrical applications, impregnation encapsulation of coils, dry type transformers. OLTC Boards, Busbar supports etc. The mouldings produced have exceptionally good electrical insulation properties for industrial applications and excellent mechanical and chemical resistance properties. PROPERTIES OF PLIOGRIP EPOXY RESIN PER 5200TC  PROPERTIES OF HARDENER PH 700  MIXING RATIO (PARTS BY WEIGHT)  MIXING TEMPERATURE AND PROCEDURE PLIOGRIP EPOXY RESIN PER 5200TC is melted separately by heating at 110° -150° C. It is then mixed with the required quantity of hot filler under a vacuum of 1-2 mm of Hg for 1-2 hours. The pre-weighted quantity of hardener. PLIOGRIP PH 700 is added into the mix at around 125° to 135° C and mixed thoroughly keeping the vacuum around 20 mm of Hg for 5-10 min. POT LIFE The usable life of the system (viscosity up to 1500 cps) for 400 gms mass of the mix for the unfilled system is as follows:  CURING SCHEDULE: In order to achieve the best mechanical properties, it is recommended to cure initially at a temperature not exceeding 140°C and subsequently post cure for above 2 hours at 160 DC. The minimum demoulding time is 4-5 hours at 120°C .or 3-4 hours at 140 ° C.   PACKING RESIN HARDNER 50 KGS BAREL & 25 KGS BAG SAEFTY PRECAUTIONS: Direct contact of Resin/Hardener with skin should be avoided. Use of hand gloves while handling them is recommended. Splashes on the skin, if any, should be removed immediately with soap and lukewarm water or with a suitable remover. STORAGE: Should be stored in closed containers in cool condition away from direct sunlight. Shelf life of Resin & Hardener @ 25°C. is about 18 months from the date of manufacturing. NOTE: The information given in this literature is based on the present state of our knowledge but any conclusions and recommendations are made without any liability on our part. Buyers and users should make their own assessment of our products under their own conditions and for their own requirements

PLIOGRIP RESINS & CHEMICALS PVT LTD

Regd office & factory:  Plot No.W-78, Phase-II, MIDC, Dombivili (E), Dist:Thane-421203, Maharashtra,

Factory : Plot No.A/681, T.T.C Industrial area, M.I.D.C, Pawane village, Navi Mumbai– 400705.

Phone : Dombivili : 91-251-2871078 Fax : 91-251-2873498 , Mobile: 09324255435 / 433

Phone : Navi Mumbai: 91-022-27780742 / 29202870 / 29252090  Mobile: 09820078238